At Estebro, we are fully commited towards the sustainability and the respect of the environment. We know that the future of our planet depends on the actions we take today. For this reason, we adopt a global approach that ensures that all our products are manufactured by using a 100% sustainable energy.
This step towards a greater sustainability is a part of our mission to reduce the environmental impact, by optimizing the use of the resources and by promoting an more ecological and responsible energy.
A renewable energy to manufacture sustainable products
From Estebro, we are firmly commited to the green energy. Each one of our products is elaborated with an energy exclusively coming from renewable sources as the wind and solar energy. This decision is reflected not only through our commitment towards the environment but also by ensuring that the products we provide to our clients have a low carbon footprint.
Self-consumption with our photovoltaic panels: one step closer to the sustainability
In our constant research for the reduction of our environmental impact, we installed photovoltaic panels in our facilities which lead to take advantage, at maximum, of the solar energy. This way of self-consumption permits to:
Reduce our CO2 emissions on a significative way, by contributing to the fight against the climate change.
Save tons or carbon which, in another way, would have been used to generate an energy in conventional plants.
Contribute to the equivalent of one hundred planted trees, thanks to the emissions reduction and the protection of the environment.
Thanks to these initiatives, we succeeded in reaching important environmental objectives such as:
A drastic reduction of the polluting emissions.
An improvement of the energetical efficiency of our facilities.
Considerable savings of fossil ressources which reinforce our role of leader in the adoption of clean technologies.
Commitment to the future
We know that every detail matters and, at Estebro, we decided to keep investing in the clean energies and sustainable solutions. Our goal is clear : leave a positive legacy to the future generations and contribute on it by being a reference company in the responsible and respectful production for the environment.
Our commitment towards the sustainability doesn´t stop here. We keep on looking for new ways to reduce our ecological footprint by using more efficient and more sustainable technologies, by enhancing our processes and by working, hand-in-hand, with our suppliers and our clients to create a greener and more responsible value chain.
Thank you for your trust in Estebro.
If you need further information, please contact us.
If you like a rustic style for your door’s decoration, we have the hardware you need for your door’s installation.
At Estebro we manufacture different types of rustic sliding door’s hardware: simple doors hardware and double rustic doors hardware, in different finishes and measures.
Today we introduce our new incorporations to this family of door hardware.
We augmented our family of rustic door fittings with two new kits and we are sure that you will find them interesting. Now available!
DOUBLE Door Rustic Kit Cod. KGN330ND
WHITE Rustic Kit Cod. KGN230B
DOUBLE Door Rustic Kit
Cod.KGN330ND
We just released our new kit of rustic hardware for rustic DOUBLE sliding doors.
In this new kit you Will find everything that you need for the assembly of your rustic double doors.
We released this kit with 3-meter plate and 60×15 mm nylon wheels:
Plate: 3 m (30×5 mm) black finish
Wheel: nylon (60×15 mm) black finish
With this kit you will be able to assemble your two doors, it is composed of the following:
1 plate 3 meters long (black finish)
2 plastic floor guides
2 rustic stoppers (black finish)
8 wall separators (for 60Ø Wheel in black finish)
2 front-facing rustic nylon wheels (60×15 black finish)
2 back-facing rustic nylon wheels (60×15 black finish)
Bolts and screws
Complete kit for assembly of 2 sliding doors
Easy to assemble and install!
Would you like to know how are these fittings installed and how do they look in full?
In this video you can see how our hardware is installed as well as its final appearance once installed.
In addition to these two new kits (double door rustic kit and white rustic kit) in Estebro we manufacture rustic door kits in:
Zinc plated or black finish (both with steel or nylon wheel, you can choice it)
Different plate sizes: 1.8m, 2m and 3m
Wheel Diameter : 60 and 90
So … Would you dare to install by yourself?
As you have seen in our videos, our hardware for sliding rustic doors are easy to install and include everything you need for assembly, in addition to your own installation instructions.
Do not miss rustic kits’ videos! They are tutorial videos where we show you the steps to install, in a quick and simple way, our hardware in a single door and in a double door.
Another of the usual doubts during the process may be what line should I choose? What hardware should I install?
To choose the line that best suits you, you must take into account the weight of the sliding door to be installed. Depending on the kilos of this, you will need one line or another of hardware.
For example:
For doors up to 75 kg: U-30 – E60-E75 Line
For doors up to 300 kg: U-40 – E150-E300 Line
For doors up to 450Kg: U-60 – E240-E450 Line
In our videos you will see:
The breakdown of fittings and accessories to place on each door.
The step-by-step assembly of each of the fittings on the door.
We hope they will help you clear up any doubts you may have about these systems and encourage you to try them!
Fittings and accessories that are included and appear in our videos: Upper rails, bends, single and double trolleys, rail supports, rail joints, wood adapter set, floor guides, stoppers for rail, lower rails,…
For any questions and/or clarification, contact us without any obligation!
Estás pensando en aumentar la seguridad de tus puertas de forma sencilla con pernos o pestillos? En Estebro disponemos de una amplia variedad de cerraduras y pernos cuadrados con barras.
En concreto, disponemos de múltiples medidas de pernos de barras cuadradas y podrás elegir la que mejor se adapte a tus #door
Medidas disponibles desde 150mm hasta 800mm!
Puede elegir sus pernos en acero y acero inoxidable.
Están perforados para que puedan ser atornillados, o también pueden ser soldados.
Incluye un tornillo M6 para sustituir el pasador.
Quieres saber más sobre nuestra familia de Pernos y Pestillos?
La familia de pernos y pestillos también tiene pernos de soldadura, pernos de solapa y pernos de tornillo.
Cerrojos de acero: mediciones cortas y largas
Cerrojos de acero inoxidable AISI 316: medidas cortas y largas y acabados satinados y/o pulidos
Pregunta por nuestra familia de Pernos y Pestillos sin compromiso!
Disponibilidad de stock de todos ellos!
Y… Si tienes alguna duda, puedes ponerte en contacto directamente con nosotros llamando al +34 976 10 72 88; a través de nuestro correo electrónico estebro@estebro.co.uk o a través del formulario de contacto en nuestro sitio web.
Puntos de pivote para pesos pesados de 90 mm y 120 mm con rodamientos de bolas
¿Conoces nuestros puntos de pivote para pesos pesados?
En Estebro, desarrollamos y fabricamos dos nuevos accesorios para puertas de portón.
Son los puntos de pivote de 90 mm y 120 mm.
Puede ver estos accesorios en las siguientes imágenes:
¿Qué características tienen estos accesorios para puerta de puerta?
Tornillos laterales: Estos accesorios tienen tornillos laterales para ajustarse al posible desplazamiento vertical de la puerta.
Junta tórica: Tienen una junta tórica para una mayor estanqueidad al agua del hardware.
Hecho en España: Estos puntos de pivote son hechos por nosotros en Zaragoza, España.
Más detalles sobre estos accesorios para puertas de puerta:
Además de estos nuevos productos, en Estebro fabricamos una amplia variedad de herrajes para puertas que seguramente se adaptarán a tus necesidades.
Puntos de pivote cuadrados
Para atornillar
Punto de pivote inferior con bola
Puntos de pivote de rodamientos de bolas de 42 mm, 50 mm, 60 mm y 70 mm
Además, también fabricamos estos puntos de pivote de acero en acero inoxidable.
¿Alguna pregunta?
Si estás interesado en saber más sobre las medidas de estos nuevos puntos de pivote para pesos pesados, en los siguientes enlaces a nuestra web podrás ver los planos de estos herrajes, así como sus características y fotos:
Y si tienes alguna duda, no dudes en ponerte en contacto con nosotros directamente en nuestro número de pone +34 976 10 72 88; a través de nuestra dirección de correo electrónico estebro@estebro.es o a través de nuestro formulario de contactoen nuestra página web.
Nos complace informarles que Estebro comienza el curso participando en la feria privada de negocios Coferdroza que se celebrará en Madrid los días 22 y 23 de septiembre, en el Pabellón de Cristal de Casa de Campo.
Después de dos años sin ediciones presenciales y en plena celebración de nuestro 60 aniversario, estamos emocionados de participar y esperamos ver a todos los asociados en la feria!
Te esperamos en el stand nº138
Ven a saludarte y conoce de primera mano todas nuestras novedades, como nuestras:
Puntos de pivote para pesos pesados
Manijas de puertas sólidas
Posicionador de bisagras y bisagras weld-On y sus accesorios
También puede ver muestras de todas nuestras gamas de productos de herrajes y accesorios para puertas en exhibición.
Estaremos encantados de recibirle e intercambiar impresiones.
No dudes en ponerte en contacto con nosotros si tienes alguna duda o quieres conocer más detalles sobre la feria
¿Qué hace la juventud del estilo rústico en la decoración?
¿Te atreverías a colocar tu propia puerta?
Nuevo Video: Cómo instalar una puerta corredera rústica paso a paso
Si lo que buscas es un entorno natural con elegancia descuidada y moderna, en Estebro tenemos los accesorios de puertas que te ayudarán a lograr una decoración rústico-chic.
¡Un nuevo video tutorial que le muestra el proceso de instalación y colocación paso a paso de nuestro kit de hardware de puertas correderas rústicas simple o de granero ya está disponible en nuestro sitio web!
¡Tan simple y conveniente que puedes montarlo tú mismo!
Gracias a nuestros kits de puertas correderas de granero, la instalación de los accesorios en la puerta es muy fácil.
Los Barn Hardware Kits incluyen todo el hardware necesario para la instalación de la puerta rústica, así como las instrucciones de montaje.
Nuestros kits de puertas correderas individuales de granero incluyen:
The first two videos that we have prepared about the accessories are videos of just over 1 minute in length where we show you the use and placement of the accessories in the Positioner:
Centering tools kit and magnet bases kit.
Still don’t know the accessories for the Hinge Positioner?
The optional accessory M4 Centering tools kit allows adjusting the gap between the profile and the door depending on the size of the hinge and is available as an optional accessory in three sizes: Ø 6 mm, Ø 7 mm and Ø 8 mm
The optional accessory Magnet bases kit ensures the fixation of the Positioner, which allows a correct alignment of the hinges, even in vertical profiles.
Besides…
We have expanded the video of the Hinge Positioner by incorporating the accessories.
This way, in the same video we can see the characteristics and advantages of the Hinges and Butt-Hinges Positioner and the characteristics, use and placement of the optional accessories that we have for it.
If the Hinges and Butt-Hinges Positioner already seemed like a useful and easy-to-handle tool, the new accessories will help you even more in the correct alignment of the hinges.
Don’t miss them!
If you need more information, do not hesitate to contact us on the following phone number +34 976 10 72 88; through our email address estebro@estebro.esor through the contact form.
Estebro uses cookies to improve your experience when you go on our website. This website uses its own cookies. There are not used for the creation of profiles. For more information, you can consult our
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.