Door Hardware: 42mm pivot hinge with bearing

50mm Pivot hinge with bearing

Pivot hinge with bearing is a hardware valid for swing gates.

Sealing ring included.

We manufacture this hardware in steel.

You will find it individually (upper cod 2921 and lower cod 2922) and in a complete set (cod 292).

¿How should this pivot hinge have to be installed on a swing gate?

If you would like to have more details on the installation of those pivot hinges for swing gates, read the installation tab.

In Estebro, we are manufacturer of gates gears. We trust on the quality of our hardware, the investigation, the development and the best customer service.

If you want to have further information on our 50mm pivot hinge to screen with ball bearing or on our hardware for swing gates, you can request it through our contact form located in the information request tab. We will get back to you as soon as possible.

Installation: Tips to install the 50mm pivot hinge with bearing:The 50mm pivot hinge with bearing is composed of 2 parts: upper and lower part. The upper part is installed by welding the square to the top part of the door and the plate to the frame, or by fitting it into the concrete of the wall. The lower part is welded to the piece installed on the floor and to the lower part of the door, allowing its opening and closing.